Sitemap
VISION WIDE TECH CO., LTD.
  • No.43, 17th Industrial Rd., Taiping, Taichung 41154, Taiwan
  • Tel: 886-4-2271 2000
  • Fax: 886-4-2271 2009
  • mail:info@visionwide.com.tw
  • Privacy Policy

NF Series

Double Column Machining Center NF Series
  • NF series, 3-axis bridge-type CNC milling machining center, is one of the most attractive products of Vision Wide, for its linear guideways and Z axis box way, wide-ranging Y travel from 2,300 mm to 3,900 mm, and much wider choices of X travel from 2,200 mm to 10,200 mm.

    Positioning accuracy could reach ±0.005/300 mm (JIS B6333).

    NF satisfies various demands in mold surface cutting, angles cutting, 3D mold cutting and precise contour finishing, and it also completes automatic 5-face machining with special designed accessories such as tool center point compensation, auto multi-angle head attachments and auto tool change system.

    • High rigidity box base, best span work table guideways, and wider load dimension ensured best level dynamic accuracy.
    • Cross-section square beam enabled the centroid of the head close to the beam center to ensure heavy cutting ability.
    • Fully auto 5-face machining capacity
      • Auto head change: 90º head / extension head / universal head
      • AVertical and horizontal auto tool change for 90º head.
      • A3-axis mechanical coordinates system
  • MODEL UNIT NF-
    2223
    NF-
    3223/
    30
    NF-
    4223/
    30
    NF-
    5223/
    30
    NF-
    6223/
    30
    NF-
    8223/
    30
    NF-
    10223/
    30
    NF-
    3226/
    33
    NF-
    4226/
    33
    NF-
    5226/
    33
    NF-
    6226/
    33
    NF-
    8226/
    33
    NF-
    10226/
    33
    X axis mm 2,200 3,200 4,200 5,200 6,200 8,200 10,200 3,200 4,200 5,200 6,200 8,200 10,200
    Y axis mm 2,300/3,000 2,600/3,300
    Z axis Box
    way
    mm 920/1,020(Opt.) 920 /1,020(Opt.)
    Linear way mm 1,000(Opt.)/1,200(Opt.)/1,400(Opt.) 1,000(Opt.)/1,200(Opt.)/1,400(Opt.)
    Table
    dimension
    mm 2,000
    ×
    2,050
    3,000
    ×
    2,050
    4,000
    ×
    2,050
    5,000
    ×
    2,050
    6,000
    ×
    2,050
    8,000
    ×
    2,050
    10,000
    ×
    2,050
    3,000
    ×
    2,450
    4,000
    ×
    2,450
    5,000
    ×
    2,450
    6,000
    ×
    2,450
    8,000
    ×
    2,450
    10,000
    ×
    2,450
    Max.
    table
    load
    kg 9,000 13,000 16,000 20,000 22,000 24,000 26,000 13,000 16,000 20,000 22,000 24,000 26,000
    Spindle
    motor
    (continuous/ 30 minutes rated)
    kW 18.5/22(22/26Opt.)(30/37Opt.) 18.5/22(22/26Opt.)(30/37Opt.)
    Spindle speed Box way 2-
    step gear
    rpm 4,500/6,000(Opt.) 4,500/6,000(Opt.)
    Belt-
    driven
    rpm 8,000/10,000(Opt.) 8,000/10,000(Opt.)
    Linear way 2-
    step gear
    rpm 22/26kW: 4,000/6,000(Opt.) ;
    30/37kW: 3000(Opt.)/5500(Opt.)
    22/26kW: 4,000/6,000(Opt.) ;
    30/37kW: 3000(Opt.)/5500(Opt.)
    Belt-driven rpm 10,000(Opt.) 10,000(Opt.)
    Spindle taper - ISO 50 ISO 50
    Cutting feed rate mm/
    min
    1-10,000 1-10,000
    Rapid traverse m/
    min
    X:24 X:24 X:18 X:12.5 X:10 X:8 X:8 X:24 X:18 X:12.5 X:10 X:8 X:8
    Y:20 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20/15 Y:20 Y:20/15 Y:20/15
    Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15 Z:15
    Positioning accuracy Refer to JIS B6333 mm ±0.005/300, 0.015/Full travel ±0.005/300, 0.015/Full travel
    Repeatability Refer to JIS B6333 mm ±0.003 ±0.003
    Tool storage capacity Vertical type tool change pcs 40/60(Opt.) 40/60(Opt.)
    Floor-standing type vertical tool chang 40(Opt.)/60(Opt.) 40(Opt.)/60(Opt.)
    Floor-standing type vertical-horizontal tool change 32 (Opt.) / 40 (Opt.) / 60 (Opt.) 32 (Opt.) / 40 (Opt.) / 60 (Opt.)
    Machine net weight kg 29,000 33,400/
    34,900
    38,400/
    40,400
    43,400/
    45,400
    48,000/
    50,400
    56,000/
    60,400
    64,000/
    70,400
    36,400/
    38,400
    41,400/
    43,900
    46,400/
    48,900
    51,000/
    53,900
    60,000/
    63,900
    69,000/
    73,900
    Machine gross weight kg 32,000 37,100/
    38,600
    43,400/
    45,400
    48,400/
    50,400
    53,000/
    55,400
    62,000/
    66,400
    70,000/
    76,400
    40,100/
    42,100
    46,400/
    48,900
    51,400/
    53,900
    56,000/
    58,900
    66,000/
    69,900
    75,000/
    79,900

    MODEL UNIT NF-3232/39 NF-4232/39 NF-5232/39 NF-6232/39 NF-8232/39 NF-10232/39
    X axis mm 3,200 4,200 5,200 6,200 8,200 10,200
    Y axis mm 3,200/3,900
    Z axis Box
    way
    mm 920/1,020(Opt.)
    Linear way mm 1,000(Opt.)/1,200(Opt.)/1,400(Opt.)
    Table
    dimension
    mm 3,000×2,450 4,000×2,450 5,000×2,450 6,000×2,450 8,000×2,450 10,000×2,450
    Max.
    table
    load
    kg 13,000 16,000 20,000 22,000 24,000 26,000
    Spindle
    motor
    (continuous/ 30 minutes rated)
    kW 18.5/22(22/26Opt.)(30/37Opt.)
    Spindle speed Box way 2-
    step gear
    rpm 4,500/6,000(Opt.)
    Belt-
    driven
    rpm 8,000/10,000(Opt.)
    Linear way 2-
    step gear
    rpm 22/26kW: 4,000/6,000(Opt.) ; 30/37kW: 3000(Opt.)/5500(Opt.)
    Belt-driven rpm 10,000(Opt.)
    Spindle taper - ISO 50
    Cutting feed rate mm/
    min
    1-10,000
    Rapid traverse m/
    min
    X:24 X:18 X:12.5 X:10 X:8 X:8
    Y:15/12 Y:15/12 Y:15/12 Y:15/12 Y:15/12 Y:15/12
    Z:15 Z:15 Z:15 Z:15 Z:15 Z:15
    Positioning accuracy Refer to JIS B6333 mm ±0.005/300, 0.015/Full travel
    Repeatability Refer to JIS B6333 mm ±0.003
    Tool storage capacity Vertical type tool change pcs 40/60(Opt.)
    Floor-standing type vertical tool chang 40(Opt.)/60(Opt.)
    Floor-standing type vertical-horizontal tool change 32 (Opt.) / 40 (Opt.) / 60 (Opt.)
    Machine net weight kg 40,500/42,500 44,500/48,000 50,500/54,000 55,500/58,500 64,500/68,500 73,500/78,500
    Machine gross weight kg 44,500/46,500 49,500/53,000 55,500/59,000 60,500/63,500 70,500/74,500 79,500/84,500

  • Standard Accessory & Function
    1. FANUC 0iMD controller
    2. Box way 4,000rpm 2-step gear type spindle (Z-axis box way)
    3. Z-axis travel 920mm
    4. Spindle oil cooler
    5. Twin hydraulic cylinders with pressured air assistance balancing system
    6. X, Y-axis ball screw support device(X > 4 m, Y-axis > 3m)
    7. Centralized auto lubrication system
    8. Independent lubrication oil collector
    9. Air blast through spindle
    10. Wash gun and pneumatic interface
    11. Cutting cooling system
    12. 40 tools magazine with arm type ATC
    13. Enclosed sheet metal guard (without roof, only for X < 8 m )
    14. Four piece splash guard (Only for X ≥ 88 m)
    15. Swiveling arm type operation panel
    16. Screw type chip conveyor on table sides
    17. Caterpillar type chip conveyor
    18. Heat exchanger for electrical cabinet
    19. Working lamp
    20. Operation cycle finish and alarm light
    21. Movable manual pulse generator
    22. Footswitch for tool clamping
    23. RJ45 interface
    24. XYZ-axis absolute pulse coder feedback
    25. XYZ-axis travel hard limits protection
    26. Spindle cutting load software protection
    27. Auto power off
    28. Vision Wide FX graphical user interface
    29. Foundation pads and bolts kits
    30. Adjustment tool and tool kits
    31. Technical manuals(operation, maintenance manual and circuit diagram)
    Optional Accessory & Function
    1. FANUC 31 iB/ SIEMENS 828D / HEIDENHAIN iTNC530/ MITSUBISHI M70 TypeA/ MITSUBISHI M720VS/ SIEMENS 840D
    2. Box way 6,000rpm 2-step gear type spindle
    3. Linear way 3000 /4000/5500/6000rpm 2-step gear type spindle
    4. 8,000/ 10,000rpm belt type spindle/ direct driven
    5. Z axis travel 1,020mm(box way spindle, for gear/ belt type spindle)
      (Unavailable with vertical-horizontal type auto tool change, multi-heads magazine on magazine side)
    6. Z axis travel 1,000/1,200/1,400mm(linear way spindle, for gear/ direct driven type spindle
    7. Column height add up 100/ 200/ 300/ 400/ 500 mm
    8. Vertical type tool magazine 40/60T
    9. Floor-standing vertical type tool magazine 40/60T
    10. Floor-standing vertical-horizontal type tool magazine 40/60T
    11. Coolant through spindle system 20/70 bar(Vertical spindle)
    12. Spindle ring cutting coolant device(for no head attachment)
    13. Coolant through tool holder interface
    14. Coolant through tool holder 5/20 bar cutting fluid interface
    15. Oil skimmer
    16. Oil mist cooling device
    17. 60 tools magazine with arm type ATC
    18. Enclosed sheet metal guard with roof (for NF-xx23/26 model , X<=6m)
      Four piece sheet metal guard
      Enclosed sheet metal guard(without roof, X≧8m)
    19. Overhead pendulum type operation panel
    20. Chip auger on table sides
    21. Chip cart
    22. Air conditioner for electrical cabinet
    23. XYZ-axis linear scale
    24. 3-axis independent manual pulse generator
    25. Sub working table
    26. Rotary table
    27. Interface reserved for fourth axis
    28. Z-axis retract function at power failure
    29. Auto tool length measurement
    30. Auto workpiece measurement
    31. Transformer
    32. Auto warm up