DV Series

Heavy Cutting Vertical Machining Center DV Series
  • DV series is designed for heavy cutting requirements. All the main casting parts are made from Meehanite level cast iron with a one-piece design. 4 box way of bed offers more support ability to ensure the best performance on loading and rigid ability during heavy cutting. All guideways are through heat treatment to meet HRC50 hardness. The sliding surface adopted Turcit through scraping to decrease friction to keep the best feeding performance.

    • One-piece casting for axial bearing housing, XYZ axes with motor direct-driven ball-screw to make sure high positioning accuracy.
    • Z axis with High torque to make sure high acceleration transmission (Ball-bar test less than 0.01mm) .
    • Roller type linear guideway, loading, and rigidity are 30% higher than other C-type machines with ball bearing type.

    Friendly Operation

    • Front large door for easy loading workpiece, the wider visible zone for easily watching cutting status.
    • Sliding doors at both sides allow less space occupation and ensure no chips or coolant splash out during operation.
    • Reinforced glass safety protection.
    • Stainless cover, prolonged machine lifecycle.
    • Various usages, a storage space located under operation panel allows the user easy to put their objects; movable chip conveyor allows user’s working requirement.
    • Convenient coolant and pneumatic interface, front location of coolant / pneumatic interface lets the user easily operate.
  • Model Unit DV-1475 DV-1680
    X axis travel mm 1,400 1,600
    Y axis travel mm 750 800
    Z axis travel mm 700 700
    Table dimension mm 1,600×750 1,600×750
    Max. table load kg 1,500
    Spindle motor power
    (cont./ 30 min rated)
    kW 15 / 18 (11 / 15)
    Cutting federate m/min 1-10
    Rapid traverse (X/Y/Z) m/min 15 / 15 / 12
    ATC capacity pcs 24 / 32

    ※Please contact sales for more details.

  • Standard Accessory & Function
    1. FANUC 0iMF PLUS controller
    2. 6,000 rpm/#50/gear driven spindle
    3. 24 tools magazine with arm type ATC
    4. Air blast through spindle
    5. Spindle cooling system
    6. Spindle ring cutting coolant device(for no head attachment)
    7. Switch for tool clamping
    8. Swiveling arm type operation panel
    9. Centralized auto lubrication system
    10. Enclosed sheet metal guard with roof
    11. Working lamp  
    12. Operation cycle finish and alarm light
    13. Wash gun and pneumatic interface
    14. Cutting coolant system 
    15. Movable manual pulse generator
    16. RJ45 interface 
    17. Heat exchanger for electrical cabinet 
    18. XYZ-axis absolute pulse coder feedback
    19. Spindle load hardware protection
    20. Remote monitoring software-standard
    21. Auto power off
    22. Vision Wide FX graphical user interface
    23. 10.4〞LCD/MDI
    24. Foundation pads and bolts kits
    25. Adjustment tool and tool kits
    26. Technical manuals(operation, maintenance manual and circuit diagram)
    Optional Accessory & Function
    1. MISTUBISHI M70 controller / HEIDENHAIN iTNC 620 controller
    2. 8,000rpm/#50/belt driven spindle ; 10,000/12,000/15,000rpm/♯40 direct driven
    3. 32 tools magazine with arm type ATC
    4. Coolant through spindle system 20/50bar
    5. Coolant through tool holder 5/20 bar cutting fluid interface
    6. oil skimmer
    7. Chip flushing system
    8. Air conditioning for electrical cabinet
    9. XYZ axis linear scale feedback
    10. Auto tool length measurement
    11. Auto workpiece coordinate measurement
    12. Rotary table
    13. Interface reserved for fourth axis
    14. Caterpillar type chip conveyor / Water tank
    15. Chip cart
    16. Remote monitoring software-Professional
    17. Z-axis retract function at power failure
    18. Transformer
    19. Auto warm up

  • DV Series

    DV- Friction Stir Welding