product search

Double column machining center

High efficiency machining

Rigid heavy cutting

Moving beam/ fixed beam 5-face machining

High performance 5-axis machining center

Gantry type Machining center

Vertical Machining Center

Portal Milling Machine

MS Series

home > products > MS Series
Portal Milling Machine MS series
    • MS series machines, with typical VW products features of rigid structure and high precision, are designed with direct-driven X-Y transmission device and torque enlarger unit on X-axis, increase the X-Y moving accuracy and offer the combination control of speed and precision.
    • Twin Hydraulic cylinders plus pressured nitrogen accumulator balancing design provides smooth & accurate feeding performance. Z-axis can reach 0.5G acceleration and keep a holding position at power failure.
    • Heavy duty roller ways on X-Y axis contain the advantages of low friction and high stiffness.
    • High stiffness light-weight table design, ensures high acceleration/deceleration when loading.
    • Y-axis upper roller way is positioned on the top of beam at max. span design offers strong supporting.
    • Torque enlarger unit on X-axis increases the transmission torque and ensures the transmission accuracy.
  • MODEL UNIT MS-
    2112    		 MS-
    2612    		 MS-
    3112    		 MS-
    4112    		 MS-
    2116    		 MS-
    2616    		 MS-
    3116    		 MS-
    4116    		 MS-
    2120    		 MS-
    2620    		 MS-
    3120    		 MS-
    4120
    　　　TRAVEL
    X axis mm 2,100 2,600 3,100 4,100 2,100 2,600 3,100 4,100 2,100 2,600 3,100 4,100
    Y axis mm 1,200 1,600 2,000
    Z axis Box way mm 800 800/1,000(Opt.)
    Linear way mm 800(Opt.) 800(Opt.)/1,000(Opt.)
    　　　TABLE
    Table dimension mm 2,000
    ×
    1,100    		 2,500
    ×
    1,100    		 3,000
    ×
    1,100    		 4,000
    ×
    1,100    		 2,000
    ×
    1,500    		 2,500
    ×
    1,500    		 3,000
    ×
    1,500    		 4,000
    ×
    1,500    		 2,000
    ×
    1,800    		 2,500
    ×
    1,800    		 3,000
    ×
    1,800    		 4,000
    ×
    1,800
    Max. table load kg 4,000 5,000 6,000 8,000 8,000 9,000 10,000 12,000 8,000 9,000 10,000 12,000
    　　　SPINDLE
    Spindle motor(Continuous/30 minutes rated) kW 18.5/22(22/26 Opt.) 18.5/22(22/26 Opt.) 18.5/22(22/26 Opt.)
    Spindle speed Box way spindle 2-step gear rpm 6,000/4,500(Opt.) 6,000/4,500(Opt.) 6,000/4,500(Opt.)

    Belt-driven

    		 8,000(Opt.)/10,000(Opt.) 8,000(Opt.)/10,000(Opt.) 8,000(Opt.)/10,000(Opt.)
    Linear way spindle Direct-driven 10,000(BT-50)(Opt.)/
    15,000(BT-40)(Opt.)    		 10,000(BT-50)(Opt.)/
    15,000(BT-40)(Opt.)    		 10,000(BT-50)(Opt.)/
    15,000(BT-40)(Opt.)
    Built-in 18,000(Opt.) 18,000(Opt.) 18,000(Opt.)
    　　　FEED
    Cutting feedrate mm/min 1-10,000 1-10,000 1-10,000
    Rapid traverse m/min XY：24
    Z：15    		 X：18
    Y：24
    Z：15    		 XY：24
    Z：15    		 X：18
    Y：24
    Z：15    		 XY：24
    Z：15    		 X：18
    Y：24
    Z：15
    　　　OTHERS
    Machine net weight kg 20,500 22,500 24,500 28,000 20,000 22,000 24,000 27,500 21,000 23,000 25,500 29,500
    Machine gross weight kg 23,500 25,500 28,500 32,000 23,500 23,500 28,000 31,500 24,500 26,500 29,500 33,500

  • Standard Accessory & Function
    1. Fanuc 0i MD controller
    2. 6,000 rpm 2-step gear spindle (Box way)
    3. Spindle and gear box cooling system
    4. Twin hydraulic cylinders with pressure air assistance balancing system
    5. 32 tool magazine with arm type ATC
    6. Centralized auto lubrication system
    7. Independent lubrication oil collector for 3 axes(X/Y/Z)
    8. Enclosure splash guard(without roof)
    9. Working light
    10. 3-color signal lamp
    11. Air blast through spindle
    12. Moveable manual pulse generator
    13. Wash gun & pneumatic interface
    14. RS232 interface
    15. Absolute pulse coder feedback
    16. Vision Wide VW-FX graphical user interface
    17. Coolant system (Ring & Nozzle)(only for box way spindle)(without AC interface)
    18. Heat exchanger for electrical cabinet
    19. Twin chip screws on table side
    20. Caterpillar type chip conveyor
    21. Foundation pads & bolts kits
    22. Tool kits
    23. Operation manual, PLC & electrical circuit diagram
    Optional Accessory & Function
    1. 4,000/4,500/8,000 rpm 2-step gear spindle
    2. 8,000 /10,000 rpm belt-driven spindle
    3. 18,000/24,000rpm Built-in spindle
    4. 10,000rpm direct-driven spindle
    5. 40T tool magazine
    6. Coolant through tool holder interface
    7. Coolant through spindle system
    8. HEIDENHAIN linear scale feedback
    9. 200/300/400 mm higher column extension(Higher column 200mm extended only for SF-xx12 series)
    10. Sub working table
    11. Oil skimmer
    12. Oil mist cooling device
    13. Rotary table
    14. Interface preparation for rotary table(Machine contains within the hose and oil tank)
    15. 3-axis manual pulse generator
    16. Automatic tool length measurement
    17. Automatic work piece measurement
    18. Manual clamping heads: 90 degree / extended / universal
    19. Semi-auto clamping heads:90 degree
    20. Transformer
    21. Chip cart
    22. Z-axis retract function at power failure
    23. Full enclosure splash guard


visionwide

No.43, 17th Industrial Rd., Taiping, Taichung 41154, Taiwan
Tel:886-4-2271 2000 Fax:04-2271 2009 E-mail:info@visionwide.com.tw
Privacy Policy